VLC 1000 Vinyl and Laminate Cutter
The professional and powerful cutter power for floorboards up to 14 mm thick
- for particularly thick laminate, vinyl, and design flooring up to 14 mm thick and 370 mm wide, as well as professional use
- gear unit with 3-fold power transmission and a patented return mechanism for effortless cutting and moving back the blade
- offers maximum ease for large-scale floor laying projects, especially with thick materials – with minimal noise and dust and no need for power
Product description |
|
The VLC 1000 is a high-quality, powerful vinyl and laminate cutter for professional use. Its gear unit with 3-fold power transmission makes it easy to cut thick laminate, vinyl and design boards with a material thickness of up to 14 mm and a width of 370 mm. The patented return mechanism moves the blade back to its original position after the cut and thus optimises your work progress. Thanks to the smooth blade, even boards with integrated impact sound insulation can be cut cleanly and without splinters, while the decorative layer stays perfectly intact. The VLC 1000 also efficiently handles click vinyl boards and vinyl tiles with a thickness of up to 6 mm; thanks to its EDP coating, nothing sticks to the blade. When cutting, the cutter bar serrations and the limit stop ensure that the workpiece is securely fixed, while the non-slip cushion feet ensure the stability of the VLC 1000 itself. You can conveniently rest the panels on the material support. You can adjust the integrated 90° limit stop in 4 steps of 40 mm each, thereby optimising the cutting angle for small widths of 210 to 370 mm. And with the VLC 1000, you are ready for diverse material thicknesses. Simply adjust the cutting gap to the right setting: step 1 for board thicknesses of 2 to 4 mm, step 2 for 5 to 8 mm, step 3 for 9 to 11 mm and step 4 for 12 to 14 mm. The stop not only helps you make accurate 90° cuts – for angle cuts between 0 and 180° and rip cuts, you can adjust or completely remove it. If you want to cut particularly thick boards, you can clamp them to the extra-wide cutter bar. With the VLC 1000, you produce minimal noise and dust when you work. This makes it ideal for use directly at the place of installation, whether in your own home or at your customer's place. |
Suitable for material |
|
Very suitable | Laminate, Vinyl, Design flooring |
Properties |
|
gear unit for 3-fold power transmission makes it easy to cut very thick laminate, vinyl and design boards with a material thickness of up to 14 mm patented return mechanism moves the blade back to its original position after the cut, to speed up the work progress blade with large cutting edge for clean cuts through all laminate, vinyl and design flooring – including those with integrated footfall sound insulation – up to 14 mm thick and 370 mm wide safe, splinter-free cutting thanks to special blade geometry, for an intact decorative layer 90° stop can be adjusted in 4 steps of 40 mm each: front position for a max. cutting width of 210 mm, rear cutting position for a max. cutting width of 370 mm EDP blade coating for cutting click vinyl planks and vinyl tiles up to 6 mm thick cutting gap can be adjusted in 4 steps to cut material with different thicknesses: step 1: 2–4 mm, step 2: 5–8 mm, step 3: 9–11 mm, step 4: 12–14 mm removable, adjustable stop for accurate 90° cuts and angular cuts from 0–180°, as well as rip cuts extra-wide cutter bar makes it possible to fasten thick boards with a one-hand clamp or similar the cutter bar serrations and the limit stop ensure that workpiece is securely fixated when cutting material support to support the planks thanks to the minimal noise and dust produced, it is ideal for use directly at the place of installation slip-resistant cushioned feet for a sturdy footing high quality "Made in Europe" |
Technical data |
|
Laminate thickness, max. | 14 mm |
Vinyl thickness, max. | 6 mm |
Design thickness, max. | 11 mm |
Cutting width, max. | 370 mm |
Back square | 90° |
Scope of delivery |
|
Scope of delivery |
1 VLC 1000 Vinyl and Laminate Cutter 1 Allen key 1 Material support |
If you have questions or want to order a spare part, please contact wolfcraft customer service.
Click here to order spare parts.
ID | Name |
---|---|
115981101 | Handle assembly group, 6940 |
116620666 | Support foot 6940 |
116620669 | Angle stop 6940 |
116620670 | Material support 6940 |
116620746 | Rubber Foot (Old No. 117710142) |
116910003 | Allen key A/F4, 6940 |
140006940 | Packaging 771 x 189 x 190 mm, 6940 |
143006940 | Manual 6940 |