text.skipToContent text.skipToNavigation

Fine Dust Mask, FFP2 V NR D

Protection against hazardous particles

  • filter class FFP2, controlled quality in acc. with standard EN 149:2001 + A1:2009, PPE Regulation (EU) 2016/425, disposable product
  • successful dolomite dust load test (D)
  • malleable filter fabric, shapeable nose strip, innovative filter technology and breathing valve for easy breathing (V)
CE

Triman-FR_Logo_GRA

Product description

The filter class FFP2 dust mask from wolfcraft complies with the PPE Regulation (EU) 2016/425. It protects the respiratory tract from harmful dust, smoke and aerosols, e.g. from wood, paint, varnish, steel, antimony, ash, barium, concrete, emulsion paint, diesel soot, fluoride, coal dust, copper, solvent-free paints, ozone, fungal and mould spores, titanium, vanadium, cement, pesticides, structural steel, zinc, solder, softwood, rust protection, as well as when working with glass/mineral fibres. The protection class is designed for filtering 94 percent of the particles up to a size of 0.6 μm and allows safe use at workplaces with up to 10 times the occupational exposure limit value (OEL). The mask is equipped with an additional breathing valve that significantly eases breathing in comparison to masks without valve.The mask is equipped with an additional breathing valve that significantly eases breathing in comparison to masks without valve. The soft filter fabric is pleasant to wear and ensures a good seal along the contours of your face. The nose strip can be shaped; this means that you can adapt it individually to achieve a tight yet comfortable fit. The fine dust mask fulfils the special requirements of the dust clogging test. As a disposable product, it can be used for one work shift. Its safety is guaranteed by quality control in acc. with the EN 149:2001 + A1:2009 standard. 

Properties

complies with PPE Regulation (EU) 2016/425 for highest levels of safety 
filter class FFP2 for protection against hazardous dust and aerosols; ideal for woodworking, grinding and insulation tasks 
standard-compliant design for filtering 94 percent of the particles up to a size of 0.6 μm; allows safe use at workplaces with up to 10 times the occupational exposure limit value (OEL)  
breathing valve for easy breathing (V) 
malleable filter fabric for a good seal along the contours of the face 
nose strip can be individually shaped for comfort and tight fit 
successful dolomite dust load test (D) 
disposable product, can be used for one work shift (NR) 
EN 149:2001 + A1:2009-tested quality for peace of mind  

Technical data

Filter class FFP2 V NR D 
According to standard DIN EN 149:2001 + A1:2009 
Additional product specification respiratory protection against harmful dust, mist and smoke, e.g. from wood, paint, varnish, steel, antimony, ash, barium, concrete, emulsion paint, diesel soot, fluoride, coal dust, copper, solvent-free paints, ozone, fungal and mould spores, titanium, vanadium, cement, pesticides, structural steel, zinc, solder, softwood, rust protection, as well as when working with glass/mineral fibres 

Instructions

FFP2 masks afford protection against solid and liquid particles that are damaging to the health. The maximum admissible pollutant concentration is 10 times the MAK value.The maximum admissible pollutant concentration is 10 times the MAK value. 
The MAK value (German abbreviation for maximum workplace concentration) is the maximum permitted concentration of a substance in the (breathing) air at the workplace in the form of gas, vapour or suspended particles, which is not considered hazardous to the health, even if one is usually exposed to such concentration 8 hours a day and a maximum of 40 hours a week. 
Storage notice air humidity <75%, temperature range -22°C - +55°C 
Shops Article number Contents EAN
4840000 3 4006885484009