text.skipToContent text.skipToNavigation

Guide Rail FKS 145 for Circular Hand Saws

Guide system for circular hand saws

  • straight cutting guidance during longitudinal, transverse and mitre cuts up to a cutting length of 110 cm
  • separable rail for space-saving storage
  • carriage for guiding mains-operated circular hand saws and cordless circular hand saws, including with small base plate
10 Jahre Garantie

Product description

The two-piece guide rail FKS 145 is not only suitable for mains-operated circular hand saws, but also for cordless circular handsaws with a small base plate. The guide rail can be used with commercially available circular hand saws with a cutting depth of 40-70 mm, a saw blade diameter of 130-200 mm and a base plate with dimensions ranging from 78 x 210 mm to 256 x 385 mm. Two foam rubber strips on the underside of the aluminium rail ensure non-slip contact with your workpiece while the two associated clamps with protective caps ensure secure fixing of the rail to the surface without any damage. You can use it to make straight and long cuts as well as mitre cuts through longer workpieces with ease, even in areas far away from the edge. The rubber lip reduces the risk of skips and marks the cutting edge at the same time. Corresponding notches in the rail automatically open and close the circular hand saw's safety guard as it moves over them. You adjust the guide carriage exactly to the rail using three adjustment screws. Aligning the circular hand saw on the rail's guide carriage is also quick and easy. The integrated alignment aid on the guide carriage helps you to set the correct distance between the saw blade and the guide rail, without the need for a folding rule. The FKS 145 can be separated in the middle and securely joined using two connectors. Together, the two sections permit a cutting length of 110 cm – one section is sufficient for cutting lengths of up to 55 cm. If you want to work on extra-long workpieces, you can extend the guide rail to a cutting length of 220 cm using the optionally available extension set (art. no. 6914000) – the ideal circular hand saw accessory for cutting and shortening door leaves and kitchen worktops and for all tasks where guidance and safety are required. 

Properties

Rail with an overall length of 145 cm for cuts up to 110 cm, separable for cuts up to 55 cm and space-saving storage 
with continuous stop rail and extra-long limit stops for mains-operated and cordless circular hand saws – including with small base plate 
plastic carriage with honeycomb structure and three adjustment screws for optimum stability and easy adjustment 
alignment aid for parallel alignment of the circular hand saw and the guide rail without the need to measure 
rubber lip reduces skips and marks the cutting edge for precise results 
notches in the rail automatically open and close the circular hand saw's safety guard as it moves over them for maximum safety 
high-quality aluminium design for durability 
the two clamps hold the rail securely on the workpiece 

Technical data

dimensions rail 190 x 1,450 x 12 mm
machine area passend für alle Handkreissägen mit 
- einer Schnitttiefe von 40 - 70 mm 
- einem Sägeblattdurchmesser von 130 - 200 mm 
- einer Grundplatte von min. 78 x 210 mm bis max. 256 x 385 mm 

Scope of delivery

Inhalt 2 clamps 


Shops Art.no. Content EAN
6913000 1 4006885691308

datasheet.component.datasheets

143006913-PRO-BA-MAN.pdf
ID Name
115980480 Spare part, cradle assembly group 6913
115980481 Spare part set, saw blade stop 6913
115980506 Spare part set, surface protection 6913
115981020 Rail connector 6913, 6914
115981027 Spare part set, splinter shield 6913
116620627 Joiner 6913, 6914
117010915 Limit stop, longitudinal direction 6913
119906913 Accessory bag 6913
119916913 Accessory bag, clamp 6913
140006913 Packaging 6913
141006913 Insert for packaging 6913
143006913 Manual 6913