text.skipToContent text.skipToNavigation

Dowelling jig

Multifunctional drill gauge for dowel joints and rows of shelf support holes

  • 5-in-1 function: guidance aid and dowel template for 32 mm shelf support holes as well as edge-to-edge, corner butt and T-butt joints
  • high-quality design, 670 mm long, for boards up to 600 mm long and 12-40 mm thick
  • two integrated scales, 32 mm shelf support holes, moveable drill slide with exchangeable bushes for drill holes with 5, 6, 8 and 10 mm Ø
Made in Europe

10 Jahre Garantie

Product description

With the multifunction dowelling jig you are ready for numerous woodworking and furniture-making projects. The clever helper provides reliable assistance when making exact corner butt and T-butt joints. It enables shelf support holes in the 32 mm grid dimension commonly used in carpentry and the precise positioning of drill holes for hinges and fittings. You can also use the high-quality product as a guide rail when drawing, cutting, sawing and milling. The dowelling jig consists of a high-quality guide rail with lock-in holes spaced 32 mm apart. You insert the drill slide, which you can equip with a 5, 6, 8 or 10 mm bush, into these holes. This lets you make rows of dowel holes and shelf support holes spaced 32 mm apart. You set the distance from the holes to the edge of the board using the angle stops, which are inserted under the profile. Distances of 12-40 mm are possible here. The side stops enable you to precisely set the beginning and end of the row of dowel holes. 
Face drill holes and edge-to-edge joints 
Start by marking all board edges with the carpenter's triangle, which will help you to position the dowelling jig on the right edge later. Position the dowel aid in the middle of the board to determine the position of the side stops. Next adjust the stop, select the correct drill bush for the dowel pin and insert it into the drill slide from underneath. Then slide it into the slot in the aluminium bar. Use a depth stop to limit the drilling depth. 
Corner joints 
To make a corner butt joint, clamp the board vertically on the workbench. Place the dowelling jig on the edge of the board, making sure that the lateral stop is touching the board edge with the carpenter's triangle. Then secure the dowelling jig using two one-hand clamps. Drill the first hole, noting the position on the scale for orientation for the other drill holes. Then allow the drill slide to engage in every third hole, secure it and drill. 


versatile in use as a dowel template for edge-to-edge, corner butt and T-butt joints or shelf support holes  
acts as a guide rail for drawing, cutting, sawing and milling for precise results 
adjustable stop for use on boards with a thickness of 12-40 mm 
exchangeable bushes for drill holes with Ø 5, 6, 8 and 10 mm 
moveable drill slide for fast and precise drilling of a series of holes 
integrated row of holes for 32 mm grid dimension commonly used in carpentry 
two integrated scales simplify precise alignment and positioning 
lateral stop for precise alignment with the workpiece 

Technical data

Product width 87 mm
Product length (depth) 670 mm
Product height 50 mm

Tool area for boards up to 600 mm long and with a thickness of 12-40 mm 

Shops Article number Contents EAN
4650000 1 4006885465008
ID Name
115960221 Drill bush 6 mm 4650 (old no. 117220107)
115960222 Drill bush 8 mm 4650 (old no. 117220108)
115960223 Drill bush 10 mm 4650 (old no. 117220109)
116410120 Guide rail 4650
116620113 Knurled screw 4650
116620125 Angle stop 4650
117220106 Drill bush 5 mm 4650
119900561 Accessory bag II 4650
119900898 Accessory bag, drill bushes 4650
119904650 Accessory bag I 4650 new
119914650 Accessory bag II 4650 new
140004650 Packaging 691x52 mm 4650
143004650 Manual 4650
143204650 Manual 4650, from 08.2019