text.skipToContent text.skipToNavigation

Annular Bit, Tungsten Carbide Tipped, With SDS Plus Mandrel, Ø68mm

For installing flush sockets in concrete, brick walls and stone; cutting depth 46 mm

  • annular bit tipped with specially soldered heat-resistant carbide plates for drilling holes in concrete, brick walls and stone
  • Ø 68 mm, 46 mm cutting depth, for installing flush sockets
  • impact and shock resistant for use with hammer drills thanks to specially hardened SDS Plus shank, 110 mm
TÜV Rheinland bauartgeprüft Lochsägen

Product description

This tungsten carbide tipped annular bit including mandrel with specially hardened 110 mm long SDS Plus shank is especially suitable for use with hammer drills. The specially soldered heat-resistant carbide plates are extremely durable and let you drill materials such as concrete, brick walls and stone with ease (e.g. concrete slabs, kerbstones and similar types of hard stone). With a diameter of 68 mm and a possible cutting depth of 46 mm, the annular bit is ideal for installing flush sockets. A centring drill bit (Ø 8 mm) with a length of 70 mm helps you to position your drilled hole exactly. To enable you to get going straight away, the hole saw comes pre-assembled. The annular bit is TÜV-tested, meaning you can be sure of a safe, quality product. 

Suitable for material

very suitable Concrete, Breeze block, Brick, Washed-out concrete, Brick walls, Sand lime brick, Pumice stone, Aerated concrete, Breeze block, Floor screed, Clinker, Plaster 
conditionally suitable Textile-reinforced concrete, Cobblestone, Flat brick, Marble, Granite, Slate 

Properties

annular bit tipped with specially soldered heat-resistant carbide plates for drilling holes in concrete, brick walls and stone (e.g. concrete slabs, kerbstones and similar types of hard stone)  
impact and shock resistant thanks to specially hardened SDS Plus shank, 110 mm 
Ø 68 mm, 46 mm cutting depth – ideal for installing flush sockets 
includes mandrel and centring drill bit, Ø 8 mm, 70 mm long, pre-assembled for immediate use 
reliable dust removal by means of 2 discharge holes, stops the annular bit becoming clogged 
TÜV-tested quality for peace of mind 

Technical data

working diameter 68 mm
cutting depth 46 mm
drill diameter 8 mm
drill length 70 mm
shank version SDS-plus shank 
shaft length 110 mm
threaded connector M 16 
cutting edge version specially soldered heat-resistant carbide plates 
further product specification 2 discharge holes 
impact and shock resistant 
Specially hardened, precise, wear-resistant drill shank 
direction of rotation clockwise rotation 

Scope of delivery

Inhalt 1 hollow annular bit 
1 mandrel with centring drill bit 
Shops Art.no. Content EAN
8914000 1 4006885891401