Annular Bit, Tungsten Carbide Tipped, With SDS Plus Mandrel, Ø 68 mm

For installing flush sockets in concrete, brick walls and stone; cutting depth 46 mm

Annular Bit, Tungsten Carbide Tipped, With SDS Plus Mandrel, Ø 68 mm

annular bit tipped with specially soldered heat-resistant carbide plates for drilling holes in concrete, brick walls and stone
Ø 68 mm, 46 mm cutting depth, for installing flush sockets
impact and shock resistant for use with hammer drills thanks to specially hardened SDS Plus shank, 110 mm

Product details

Product description

This tungsten carbide tipped annular bit including mandrel with specially hardened 110 mm long SDS Plus shank is especially suitable for use with hammer drills. The specially soldered heat-resistant carbide plates are extremely durable and let you drill materials such as concrete, brick walls and stone with ease (e.g. concrete slabs, kerbstones and similar types of hard stone). With a diameter of 68 mm and a possible cutting depth of 46 mm, the annular bit is ideal for installing flush sockets. A centring drill bit (Ø 8 mm) with a length of 70 mm helps you to position your drilled hole exactly. To enable you to get going straight away, the hole saw comes pre-assembled. The annular bit is TÜV-tested, meaning you can be sure of a safe, quality product.

Suitable for material
Very suitable	Concrete, Breeze block, Brick, Washed-out concrete, Brick walls, Sand lime brick, Pumice stone, Aerated concrete, Breeze block, Floor screed, Clinker, Plaster
Conditionally suitable	Textile-reinforced concrete, Cobblestone, Flat brick, Marble, Granite, Slate

Properties

annular bit tipped with specially soldered heat-resistant carbide plates for drilling holes in concrete, brick walls and stone (e.g. concrete slabs, kerbstones and similar types of hard stone)
impact and shock resistant thanks to specially hardened SDS Plus shank, 110 mm
Ø 68 mm, 46 mm cutting depth – ideal for installing flush sockets
includes mandrel and centring drill bit, Ø 8 mm, 70 mm long, pre-assembled for immediate use
reliable dust removal by means of 2 discharge holes, stops the annular bit becoming clogged
TÜV-tested quality for peace of mind

Technical data
Working diameter Ø	68 mm
Cutting depth	46 mm
Drill diameter	8 mm
Drill length	70 mm
Shank version	SDS-plus shank
Shaft length	110 mm
Threaded connector	M16
Cutting edge version	Specially soldered heat-resistant carbide plates
Additional product specification	2 discharge holes impact and shock resistant Specially hardened, precise, wear-resistant drill shank
Direction of rotation	Clockwise rotation

Instructions
	Vor Beginn der Arbeiten unbedingt Spannungsfreiheit herstellen und die länderspezifischen Sicherheitsregeln (z.B. Deutschland: DIN VDE 0105) beachten!