Annular Bit Insert, Tungsten Carbide Coated, Ø 103 mm
For plumbing and electrical installations in brick walls and stone, cutting depth 55 mm
- tungsten carbide coated annular bit insert for drilling holes in brick walls and stone
- 55 mm cutting depth – ideal for building projects or renovations
- can only be used with the separately available receptacle plate (art. no. 3466000) and centring drill bit with hexagon shank (art. no. 3471000), TÜV-tested quality for peace of mind
Product description |
|
| The tungsten carbide coated annular bit insert is especially suitable for drilling holes with a power drill or cordless screwdriver in brick walls and stone (e.g. pumice stone, aerated concrete or similar types of soft and medium-hard stone). With a possible cutting depth of 55 mm and a selection of diameters, the insert is ideal for building projects or renovations. It is compatible with the separately available receptacle plate (art. no. 3466000) and centring drill bit with hexagon shank (art. no. 3471000). It is also TÜV-tested, meaning you can be sure of a safe, quality product. | |
Suitable for material |
|
| Very suitable | Brick walls, Brick, Breeze block, Clinker, Plaster, Breeze block, Pumice stone, Aerated concrete |
| Conditionally suitable | Sand lime brick, Cobblestone, Floor screed, Flat brick |
Properties |
|
|
tungsten carbide coated annular bit insert for drilling holes in brick walls and stone (e.g. pumice stone, aerated concrete or similar types of soft and medium-hard stone) 55 mm cutting depth – ideal for building projects or renovations can be used with the separately available receptacle plate (art. no. 3466000) and centring drill bit with hexagon shank (art. no. 3471000) Quality tested by technical inspection authority for safety |
|
Technical data |
|
| Cutting depth | 55 mm |
| Direction of rotation | Clockwise rotation |
| Cutting edge version | Tungsten carbide coated |
| Working diameter Ø | 103 mm |
| Speed of rotation, max. | 800 RPM |
Select Options
Select Options
