Installing Ceiling Spotlights

Recessed spotlights in ceilings, walls or furniture are unobtrusive light sources with which you can aesthetically light your rooms. The biggest advantage for you is that the technical components and cabling completely vanish into the background. This means they don't reduce the height of the room and you get a clean, elegant look.

Instructional Video


Step-by-Step Instructions

Step 1: Determining the diameter of the milled hole

Recessed spotlights are available in a wide range of diameters and installation heights. When choosing your lights, make sure that the installation height matches the space available in your suspended ceiling. You can find the diameter of the hole to be milled in the manufacturer's specifications for your recessed spotlight. The critical dimension is that of the part that later has to vanish into the gypsum plaster board, not the ring over the hole.

Step 2: Setting the appropriate diameter

The ideal solution for all customary spotlight diameters (Ø) is the adjustable hole saw for spotlights. It has been specially designed for use in wood and drywall boards (e.g. gypsum plasterboard and OSB panels) and can be adjusted to the customary spotlight diameters (35, 55, 60, 68, 70, 75, 80 and 85 mm ) within seconds.

To do, use the included hexagon socket wrench to unfasten the screws of the three groups of teeth, adjust them to match the required hole diameter and subsequently fasten the screws again.

The cutting depth of the adjustable hole saw for spotlights is 30 mm, so you can also use it to drill through double-boarded plasterboard walls.

Step 3: Marking the grid and positions on the ceiling

If you want to install more than one ceiling spotlight, draw a grid with the desired distances of the light sources on the ceiling. The universal angle & try square is a great help for this task.

Step 4: Cutting the hole

Make sure that the power to your work area has been switched off and that there are no power supply cables in the work area.

Insert the hole saw in the chuck of your power drill or cordless screwdriver. The triangular shank makes it compatible with all commercially available power drills and cordless screwdrivers.

Now position the centring drill bit of the hole saw on the your marking and start drilling the hole. Once you have drilled through the board, you can remove the hole saw, together with the drill core.

Step 5: Inserting and wiring ceiling spotlights

After you have drilled all holes for your ceiling spotlights at the desired positions, you can insert the ceiling spotlights. Subsequently wire and connect them as described in the manufacturer's instructions.


Other Hole Saws

In addition to the adjustable hole saw for spotlights, we also have other hole saws for interior work in our product range!

"Professional" Multi-Blade Hole Saw, Ø 60–74 mm

Saw with 3 quick-change blades, Ø 60, 68, 74 mm, cutting depth 33 mm

Hole Saw, Ø 68 mm

For socket installations in drywall materials, cutting depth 23 mm

"Electricity and Plumbing" Bi-Metal Hole Saw Blade Set, 6 Pcs.

For metals, plastics, wood and drywall materials, Ø 25–68 mm, cutting depth 40 mm

Bi-Metal Hole Saw

For drywall materials, wood, plastics and metals, cutting depth 40 mm

Adjustable Hole Saw, Ø 45–130 mm

For sawing various diameters during refurbishment and interior works

"Sockets" Hole Saw Set, 3 Pcs.

For drilling Ø 68 mm holes in wood, plastics, metals, drywall materials and tiles or glazed tiles

"Universal" Hole Saw Set, 3 Pcs.

For Ø 68 mm drilled holes in concrete, brick walls, stone, wood, plastic, metal, insulating boards and drywall

Hole Saw for Electrical Installations, Ø 68-100 mm

Saw with 5 quick-change blades, Ø 68-100 mm, cutting depth 33 mm

Hole Saw for Plumbing Installations, Ø 25-53 mm

Saw with 4 quick-change blades, Ø 25-53 mm, cutting depth 33 mm

Hole Saw for Ceiling Lights, Ø 40-65 mm

Saw with 3 quick-change blades, Ø 40, 54, 65 mm, cutting depth 40 mm

Other Interesting Projects

These topics might also be of interest to you:

Enlarging Milled Holes for Recessed Lights

Do you want to replace old recessed lights with new LED lights and now need holes with a bigger diameter? The hole enlarging tool solves this problem!

Go to project